WSN-R142 is an Android handheld terminal with integrated RFID radio frequency module, which combines 3G/GPRS communication, wireless transmission, Bluetooth, mobile positioning and otWSN-R142 is an Android handheld terminal with integrated RFID radio frequency module, which combines 3G/GPRS communication, wireless transmission, Bluetooth, mobile positioning and other functions in one.her functions in one.
"Built-in UHF, frequency band module, supports ISO18000-6B and EPC Class1 GEN2 and other international standards；
Can be built-in 125KHz, 13.56MHz and 2.45G；
Android 4.03 operating system; 4.3-inch IPS screen；
Large-capacity battery, long standby time；
With data power-down protection function；
Large keyboard design, industrial-grade design, with IP65 protection level；
Support development in multiple languages, such as VC, VB, C#, etc.；
According to application requirements, one-dimensional bar code, two-dimensional bar code, camera, Bluetooth, GPRS, WIFI, etc. are optional；
"
| Feature | Specification |
|---|---|
| Functional Characteristics | |
| Processor | Cortex A9 1GHz |
| Memory Capacity | ROM: EMMC 32GB; RAM: LPDDR2 4GB |
| Operating System | Android 4.03 |
| Wireless Communication | |
| - GPRS (Optional) | GPRS, EDGE, 4-band 900/1800, 850/1900 |
| - WCDMA (3G, Optional) | Band 850/2100, Cat.8 HSDPA, Cat.6 HSUPA |
| - WIFI (Standard) | IEEE 802.11b/g compliant |
| - Bluetooth (Optional) | Bluetooth 4.0 compliant |
| Display | 4.3-inch IPS, Resolution 480*800, HD Full Viewing Angle, Visible in Sunlight |
| Touchscreen | Supports Multi-touch Capacitive Touch |
| Indicator Lights | Network Indicator, Charging Indicator |
| Audio | Supports Voice Broadcast |
| Micro SD Card | Supports up to 32GB |
| Data Security | Power-loss Data Protection: Data remains intact even in complete power loss (battery removed and no external power) |
| GPS Specifications | |
| - Channels | 12 Channels |
| - Receiver Type | L1, C/A Code, with Carrier Phase Smoothing |
| - Reacquisition | <1s |
| - Technology | ASIC Chip; COAST Algorithm; EVEREST Multipath Technology |
| - Error Range | <=10 meters |
| Navigation Map | Supports KLD, Baidu, Google, Gaode, etc. |
| Input Method | Full-screen Handwriting, Half-screen Handwriting, Stroke, Pinyin, Numbers, Letters, Symbols |
| Physical Interfaces | High-speed USB 2.0 Device Interface, 3.5mm Plug Charging Interface |
| Camera (Optional) | Rear 5MP Camera with Flash |
| Flashlight | Low-power LED Light for Emergency Use |
| Fingerprint Module (Optional) | |
| - Sensor Type | Capacitive |
| - Image Size | 256*288 pixels |
| - Image Resolution | 500 DPI |
| - Registration Time | <3 seconds |
| - Verification Time | <0.1s |
| - Matching Time | <0.5 seconds (for 100 fingerprints) |
| - False Rejection Rate (FRR) | <0.1% |
| - False Acceptance Rate (FAR) | <0.001% |
| - Fingerprint Capacity | 512 fingerprints |
| 1D Barcode (SE4500/N431X) | |
| Readable Symbologies | Major 1D barcodes: Code 39, Code 93, Code 128, Codabar, EAN-13, EAN-8, UPC-A, UPC-E, ITF 14, UCC/EAN-128, ITF 25, Matrix 25, EAN-128, ISBN |
| Reading Distance | 0 cm - 50 cm |
| Read Performance | First Read Rate ≥99%, Misread Rate ≤0.01%, Non-read Rate ≤0.01% |
| 2D Barcode | |
| - Moto-SE4500 | Hardware Decoding, Fast Decoding Speed, Misread Rate ≤0.01% |
| - Honeywell-5180 | Hardware Decoding, Fast Decoding Speed, Misread Rate ≤0.01% |
| RFID | |
| - Low Frequency | 125KHz, Read Distance 5cm |
| - High Frequency | 13.56MHz, Supports ISO14443A & ISO15693, Read Distance 1~10cm |
| - Ultra High Frequency | 860~960MHz, Supports EPC Class1 GEN2 Protocol, Read Distance 1.5 meters |
| - 2.45G Active | 2400~2485MHz, Read Distance over 50 meters |
| Battery Performance | |
| Battery | 3800mAh Lithium Polymer Battery |
| Standby Time | >150 hours |
| Working Time | >8 hours |
| Charging Method | AC Adapter Charging (1A) |
| Standby Duration (Test) | Stands by >360 hours with wireless communication off on a full charge, still functions normally afterward. |
| Charging Time | <4.5 hours |
| Operating Time | >8 hours (on a full charge) |
| Operating Environment | |
| Operating Temperature | -20℃ ~ 50℃ |
| Storage Temperature | -20℃ ~ 70℃ |
| Relative Humidity | 10% ~ 90% RH, non-condensing |
| Protection Rating | IP65 |
| Physical Parameters | |
| Total Weight | <300g (including battery, excluding charger) |
| Device Dimensions | 148(L) × 77.5(W) × 27(H) ±2 mm |
| Accessories | |
| Standard Package | 1x Lithium Battery, 1x Charger, 1x USB Data Cable, 1x Leather Case |