"The 13.56MHz high-frequency read and write module supports the read and write functions of Fudan F08, NXPS50, S70, M1, Ntag213 and other chips.It is designed with HF high-frequency chip chip and
"The 13.56MHz high-frequency read and write module supports the read and write functions of Fudan F08, NXPS50, S70, M1, Ntag213 and other chips.It is designed with HF high-frequency chip chip and single-chip microcomputer, and supports USB and RS232 communication interfaces.The module comes with an MCU. Users do not need to write a protocol. Any serial port or USB system (51, ARM, PLC, Linux, Arduino, Windows) can read and write IC cards and NFC cards through brief instructions. The module has long card reading intervals and stable and reliable operation. It is suitable for various card reading occasions.
"l operating frequency: 13.56 MHz
l Support protocol: ISO14443A
l Radio frequency chip: Si522 or RC522, freely replaceable
l Supported card types: MIFARE 1 S50 card (M1 card), MIFARE 1 S70, mifare UltraLight, mifare Pro, mifare Desfire, ISO14443 TypeA, Fudan F08, NXP Ntag213, etc.
l Card reading interval: 0-6cm
l working voltage: 5V
l Working current: 19—25mA
l Standby current: 1mA
l Working mode: freely set to active card reading mode or passive card reading mode
l functions: read card number ID, read and write card, sector encryption, e-wallet recharge function, etc.
l Communication interface: USB
l Product size: 104*68*10mm, the size can be set according to user needs
l Status prompt: LED and buzzer
l Operating temperature: -20—80℃
l Ambient humidity: 5%-95%"
