The 13.56MHz high-frequency read and write module supports the read and write functions of Fudan F08, NXPS50, S70, M1, Ntag213 and other chips.It is designed with HF high-frequency chip chip and single-chip microcomputer, supports UART-TTL or RS232 communication interface, and can provide customized interface, customized protocol, customized size and other services according to user needs.The module comes with an MCU, and users do not need to write a protocol. Any system with a serial port (51, ARM, PLC, Linux, Arduino, Windows) can read and write IC cards or NFC cards through brief instructions.The operating voltage is DC3.3-5.5 V, and the operating voltage can be customized according to user needs. It is suitable for various card reading occasions, such as PDA embedded module, electric vehicle one-key unlocking module, NFC recognition embedded mode, lock control module and so on.
"l operating frequency: 13.56 MHz
l Support protocol: ISO14443A
l Radio frequency chip: Si522 or RC522, freely replaceable
l Supported card types: MIFARE 1 S50 card (M1 card), MIFARE 1 S70, mifare UltraLight, mifare Pro, mifare Desfire, ISO14443 TypeA, Fudan F08, NXP Ntag213, etc.
l Card reading interval: 0-6cm
l working voltage: 5V
l Working current: 19—25mA
l Standby current: 1mA
l Working mode: freely set to active card reading mode or passive card reading mode
l functions: read card number ID, read and write card, sector encryption, e-wallet recharge function, etc.
l Communication interface: USB
l Product size: 104*68*10mm, the size can be set according to user needs
l Status prompt: LED and buzzer
l Operating temperature: -20—80℃
l Ambient humidity: 5%-95%"
